What are the hydrophore failure solutions?

What are the hydrophore failure solutions?

What are the hydrophore failure solutions?

• If the booster does not flood…
Sometimes the water booster may not be flooded even though it works normally, and then there may be malfunctions in the electric motor and pump. In such cases, the first thing to come to mind is the possibility of running out of water in the tank. You can get rid of the problem by filling the tank with water. However, if there is still a water booster fault even though the tank is full, then the booster may be taking air from the suction line. The floater may be faulty. The valve in the suction line may be closed, and the clogged filter in the suction line is also a possible cause of malfunction. In some cases, an air failure may have occurred in the pump; If the pump has made air, the water booster may not flood.
• If there is a lot of noise from the booster…
If there is a sound from the booster motor, there is a possibility that the motor is stuck / there is a possibility of damage to the winding. There may be a fault in one of the phases or the capacitor may be broken. The fault can be fixed with the technical support you will receive. In addition, there may be damage to the hydraulic and mechanical elements of the pump.
How to prevent noise in hydrophores?
One of the most common water booster failures is the noise problem. If the noise in booster failures is not caused by technical reasons, it can be eliminated in several ways. Let’s put them in the following items.
• Pump selection is an important detail. It is important to operate the pump at the correct pressures as well as the correct selection of the pump.
• Sound can be transported to the installation via pipes. To prevent this, you can use a rubber hose/compensator that is resistant to the connections in the suction and discharge lines of the booster pump.
• If the pump vibrations affect the floor and thus reflect on the walls, you can mount rubber wedges under the chassis to prevent this, but the important thing here is that the pump and rubber wedges are technically compatible with each other.
• Check valves can make noise. It will be useful to regularly check whether the tires are worn or not.

What should be done to prevent hydrophore failures?
One of the most important points to avoid hydrophore failures is maintenance and cleaning. If the suction line is clogged, the booster works without water. The booster pump, which works without water, destroys the pump impeller and stages, thus burning the electric motor. Therefore, controlling the water in the tank is one of the most important details. Finally, let’s talk about filters. Regular cleaning of the filters is important in preventing many malfunctions. Regular monthly sound and tightness checks should be made. Service support should be obtained every 3 months.

LEAVE A COMMENT

Your email address will not be published. Required fields are marked *